Barrel Truck

Drum Truck

Two Sample Spears

Kett Harvester J310 Grain Moisture Tester

Atago N3 Hand Refractometer

Eclipse 45-05 Hand Refractometer

Kahl Pellet Hardness Tester

Holman Pellet Durability Tester, serial no. CM877

Dickey-John GAC2100 Grain Sample Testing Unit, serial no. 1737-13635

OHAUS MB23 MOISTURE ANALYSER, serial no. B336756306

Sartorius 1202MP Electronic Scales, 400g capacity, serial no 3103 169

Memmert Stainless Steel Cased Electric Single Door Oven, 220V, 370mm x 320mm x 400mm high (internal), indicated 30-200 degrees C

Approx. 16 Sample / Refuse Bins

Samoa Reel Master Pneumatic Grease Dispensing Gun, with pneumatic pump and part drum grease (on Mill 1 Press Floor)

Two Drums Petro Canada x 54 Precision XLEP2 Grease (food grade)

CFM 39 07W MOBILE VACUUM, serial no. 48R81, 11kW, 02971 indicated hours (at time of listing), (used as part of mill central vacuum system)

Steel Vacuum Piping throughout mill (see lot 528)

Cyclo Bins Galvanised Welded Steel Cyclone Bin, approx. 1.2m dia. x 1.7m deep, with steel stand

Orwak 3500 ELECTRO/HYDRAULIC WASTE BALING PRESS, serial no. 35040 (in warehouse)

Bramidan 4x30 ELECTRO HYDRAULIC WASTE BALING PRESS (in warehouse)

Orwak 8010 Electro Hydraulic Waste Baling Press, serial no. 29353 (in warehouse)

Premier ELECTRO/HYDRAULIC PALLET INVERTER, 1.7m x 1.2m x 1.55m (fully open)(in warehouse)

FABRICATED ALUMINIUM ON-SITE PRODUCT RECOVERY CYCLONE RECEIVER UNIT

Mainly Single Door Personnel Lockers ...[more]

STEEL FRAMED GRAIN INTAKE HOUSING approx. 8.8m x 4.9m x 9m high with profiled steel cladding.

Welded Steel Intake Pit 4m x 2.4m x 1.5m Deep With Steel Grid (purchaser to fill hole/cover following removal)

Dust Unit Hood

Airmaster AUTO M THREE SECTION DUST FILTER UNIT

400mm dia. Part Taper Screw Intake Hopper Discharge Screw Conveyor, approx. 7.5m long (C42)

Four 225mm x 225mm Electro Pneumatic Slides, with hand operated flow control valves and ducting (to screw conveyor) (under concrete silos)

300mm dia. Screw Conveyor approx. 6.3m long (under concrete silos) (C2)

300mm BELT & BUCKET ELEVATOR, approx. 19.6m centres high, with three two-way electro/pneumatic diverters and ducting as fitted (E1)

150mm BELT & BUCKET ELEVATOR, approx. 13m centres high (E1M)

Carier 150mm BELT & BUCKET ELEVATOR, approx. 15m centres high (E2M)

Carier 150mm BELT & BUCKET ELEVATOR, approx. 13.5m centres high (E3M) ...[more]

150mm BELT & BUCKET Elevator, approx. 11m centres high (E4M) legs recently replaced with galvanised steel legs ...[more]

Carier 300mm Belt & Bucket, approx. 12.5m centres high (E17)

300mm dia. Screw Conveyor, 9.4m long, with four electro/pneumatic slides and ducting (to concrete silos) (C1)

Four E&H Level Sensors (over concrete silos)

200mm dia. Dampening Screw Conveyor 3.05m long (C4M) (See lot 66)

400mm dia. SCREW CONVEYOR, 26.5m long, with 12 discharge outlets (C3)

DCE UMA STU Dust Filter Unit, serial no. 148.615 (Mill 1 Fourth Floor)

Ten 400 x 450mm Electro/Pneumatic Slides (under C3)

Airmaster Disa RJC8 2 22 VENTING UNIT, serial no. 991200 2310 (over CR9 Bin)

100mm dia. Plastic Cased Auger Conveyor, approx. 20m long, with welded steel feed hopper, fitted E&H probe ...[more]

Airmaster Disa RJC8 2 22 Venting Unit, (over CFR5 Bin)

17 E&H Level Probes

Airmaster Disa RJC8 2 22 Venting Unit, serial no. 9912002813 (over WB1 Bin)

Buhler Miag MKZM 9510 HORIZONTAL ROTARY SCREEN, serial no. 20403195 with spare screen 1.09m x 950mm dia

Plastic Water Tank, 600mm x 1400mm x 600mm deep

Master Magnets Permanent Magnetic Separator, approx. 550mm dia. x 1100mm

Bolted Steel Cyclone Receiver, approx. 1.1m dia. x 2.25m deep, with rotary paddle probe

Rota Val HD1560 Geared Motor Driven Rotary Air Seal, serial no. 40510.02

200mm dia. Screw Conveyor, approx. 10.5M long, with two discharge outlets and one electro/pneumatic slide

Flakt Woods 315mm dia. Galvanised Steel-Cased Axial Flow Fan

Bolted Steel Panel Process Bin, (CR9) approx. 2.6m x 3.6m x 8.7m deep overall

Bolted Steel Process Bin, (CR12) approx. 2.5m x 2.5m x 6.4m deep overall (formerly two compartment)

250mm x 250mm Electro/Pneumatic Two Way Diverter

Thermo Granuflow DTR131Z Flow Sensor, 240V

700mm dia. (on casing) COARSE RATION MIXER, 9.5m long, with Weg 22kW geared electric motor, crescent bladed mixer, one discharge outlet, water and...